Designed for most return line applications up to 80 GPM (303 L/min.). Also can be used for lower flow suction line applications. Compatable with petroleum-based oil in mobile and industrial equipment.

OPERATION:

Dirty Fluid enters the inlet port and permeates the filtering medium, causing contaminants to be trapped on its outer surface. Clean fluid is then directed through the outlet port. An optional integral bypass valve can be used to protect the element against line surges and high differential pressure due to contamination.

SPECIFICATIONS:

Operating Pressure:	200 PSI (13.8 Bar) maximum
Operating Temperature	250° F (121° C) maximum
Standard Seals:	Buna-N
Element Area:	1900 in. (12,259 cm)
Filter Retention: 10 micron nominal 33 micron absolute B10 = 1.5 25 micron nominal 67 micron absolute B30 = 4 10 micron glass B12 = 100

          

Ordering information